To Next PageTo Next Page
Need help?Do you have a question about the Technics SA-DA20 and is the answer not in the manual?
General| Audio Channels | 5.1 |
|---|---|
| Power Output | 100W per channel (front), 150W (subwoofer) |
| Frequency Response | 10Hz-100kHz |
| Total Harmonic Distortion | 0.08% |
| Input Sensitivity | 200 mV |
| Signal-to-Noise Ratio | 100 dB |
| Weight | 7.5 kg |
| Speaker Impedance | 4-16 ohms |
| Dimensions (W x H x D) | 430 x 145 x 355 mm |
| Digital Inputs | Optical, Coaxial |
Power cable for the unit.
Antenna for AM radio reception.
Antenna for FM radio reception.
Specific plug for FM antenna in UK.
Power source for the remote control.
Wireless controller for the unit.
Proper unit placement for ventilation and stability.
Precautions regarding power sources and voltage.
Safe handling and connection of the AC power cord.
Warnings against objects, liquids, and insecticides.
Instructions for professional repair and self-maintenance.
Step-by-step guide for replacing the AC mains plug fuse.
Identifies buttons, switches, and terminals on the main unit.
Explains various indicators and display elements on the unit.
Guides on connecting DVD players, VCRs, and TVs.
How to connect devices to the front VCR 3 terminals.
Detailed steps for connecting VCRs and TVs using a scart cable.
Guides on connecting turntables, CD players, and tape/MD decks.
Instructions for connecting digital sources via optical or coaxial cables.
Guidance on connecting FM and AM antennas for optimal reception.
Instructions for connecting FM and AM outdoor antennas.
Guidance on connecting the power cord and related information.
Recommended positions for front, center, and surround speakers.
Details on connecting front speakers, including impedance.
Guide for connecting front speakers using bi-wiring.
Details for connecting center and surround speakers.
Information on connecting subwoofers, active and passive.
Adjust speaker size (LARGE/SMALL) for optimal sound reproduction.
Set speaker distances for synchronized sound arrival.
Adjust bass cut-off frequency for front speakers.
Control dynamic range for low-volume listening.
Configure digital input terminals for correct source selection.
Adjust display brightness and unit lights for dark rooms.
Step-by-step guide for adjusting receiver settings like size, distance, and filter.
Enable 'LOW IMP' mode for speakers with impedance under 6 ohms.
Guide to setting individual speaker output levels using test signals.
For playing stereo sources or surround through two speakers.
For digital surround sources like Dolby Digital or DTS.
Adjust PCM FIX or DTS FIX modes for digital signal recognition.
Select sound field control modes for enhanced stereo sound.
Fine-tune speaker levels and delay times for SFC modes.
Guide to turning on, selecting sources, and playing audio.
Explains indicators for digital, DTS, and Dolby Pro Logic signals.
How to use 6-channel input for DVDs and its limitations.
Guide to achieving bi-amp sound using bi-wiring speaker connections.
Instructions for connecting and using a second set of speakers.
Activating VGCA for reduced noise during analogue playback.
How to keep the display on when VGCA is active.
Fine-tune audio tone (bass, treble) and sound balance.
How to select and use VCR 2 and VCR 3 terminals.
Control the output level of the subwoofer.
How to manually tune FM and AM radio stations.
Method for directly entering radio frequencies using numbered buttons.
Guide to automatically or manually preset radio stations.
How to select and tune to preset radio channels.
How to view program service, type, and text information.
How to find programs based on their PTY (Program Type).
Set the unit to automatically tune to related network programs.
Temporarily silence audio output.
Function for monitoring tape playback, often with an equalizer.
Adjust display and lights for low-light conditions.
Guide to connecting and using headphones for private listening.
Instructions for recording audio sources to tape decks or VCRs.
How to monitor sound while recording onto a tape deck.
Guide to inserting batteries and safety warnings.
Tips for effective remote operation and environmental factors.
Instructions on how to access the battery compartment.
Detailed explanation of each button's function on the remote control.
Quick reference for operating receiver functions using the remote.
Comprehensive guide to controlling disc players and MD decks via remote.
Instructions for controlling TV functions using the remote.
Guide to controlling VCR functions with the remote.
Instructions for controlling cassette deck functions with the remote.
Procedure to change remote codes for other brands or models.
Guide to setting the sleep and wake timers for the unit.
How to check timer status and cancel active timers.
How to use the HELP function to diagnose and remedy operational issues.
How to reset unit settings to factory defaults.
Instructions for cleaning the unit's exterior surfaces.
Troubleshooting steps for power, sound, display, and picture issues.
Solutions for problems with speaker sound and mode selection.
Troubleshooting tips for poor radio reception and tuning difficulties.
Detailed technical data for amplifier, tuner, video, and general unit parameters.
