Technics SA-DA20 - Low Impedance Speaker Setting

Customizing your receiver
14
RQT5861
For front speakers with an impedance under 6 Ω
Turn “LOW IMP” on if even one of your speakers has an impedance
under 6 Ω.
Press and hold [A] or [B] until “LOW IMP”
lights up on the display.
Press and hold down again to cancel “LOW IMP”.
Note that when “LOW IMP” is on, SPEAKERS A and B cannot be
used at the same time.
SPEAKERS A, B
SPEAKERS
AB
LOW IMP
SPEAKERS
A