Technics SB-G90 - Connections; Connecting the Speaker Cables

Connections
The speakers are not supplied with speaker cables. For connection, use commercially-available speaker cables.
If it is difficult to connect the speaker cables, remove the knobs before connecting them.

≥ Be careful not to cross (short-circuit) or reverse the polarity of the speaker wires as doing so may damage the amplifier.
Connecting the speaker cables
1 Turn the knobs to loosen them, and
insert the core wires into the holes.
2 Tighten the knobs.
- (Black)
+ (Red)
Do not insert the vinyl insulation.
Speaker (rear)
DO NOT
16
(16)
SB-G90_TQBM0081_PPCEBEGGN_mst.book 16 ページ ２０１７年２月１０日 金曜日 午前１０時３９分