103
(Continued)
Download Fail
• The firmware download has failed. Press any
button to exit. Please try again later.
• The server cannot be found. Press any button to
exit. Make sure that the network is connected to
the internet.
Empty
• The selected folder is empty. Move tracks into the
folder and retry the operation.
• The server is not found on the network. Check to
see if the server is connected to the same network
as this unit, and retry the connection to this unit.
(⇒ 28)
• No Internet Radio station is registered to the
favorite list. Add a station to the list. (⇒ 58)
• No station or playlist is registered to [FAV]. Add an
item to the list. (⇒ 81)
Error
• Incorrect operation is performed. Read the
instructions and try again.
Fail
• Network connection is not complete. Try the
setting again. (⇒ 28)
• The adjustment of “Space Tune (Auto)” is failed.
Disconnect the headphones before starting the
adjustment. (⇒ 13)
Firmware update is available
• The firmware (free of charge) for this unit is
available.
Press [OK].
Press [ ], [ ] to select “Yes” and then press
[OK].
• The progress is displayed as “Updating
%”
while updating. (“ ” stands for a number.)
• Do not disconnect the AC power supply cord
or turn this unit to standby while updating.
(⇒ 91)
• When the update has finished successfully,
“Success” is displayed.
Press [ ] to turn this unit off and on.
• For the update information, refer to the following
website.
www.technics.com/support/firmware/
“F
” (“ ” stands for a number.)
• An abnormality has occurred. (If this unit detects
an abnormality, the protection circuit is activated,
and the power may be turned off automatically.)
Is this unit placed in an extremely hot place?
Wait a few seconds and then turn the unit
on again. (The protection circuit will be
deactivated.)
If the problem persists, write down the displayed
number, disconnect the AC power supply cord and
consult your dealer.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
