Technics SC-CH950 User Manual

Listening
to
Compact
Discs
Sequential play
Sequential play refers to play beginning with the-first track and
continuing in order to the last track.
“no diSC” appears on the display if you have not set a disc into the
disc tray.
(Steps 2, 3 also available from the remote control)
1 Press OPEN/CLOSE to open the disc tray.
insert the disc with label facing up.
Do not put your finger through the hole in the middle of the disc
holder. It could get caught when the holder closes.
Label must face up.
2 Press OPEN/CLOSE to close the disc tray.
When the disc tray is closed, the disc rotates, and the total
number of tracks and total playing time both appear on the
display.
Total number of tracks Total playing time
‘When there are 16 or more tracks on the disc, => will appear.
—
3 Press the CD play button.
Disc play begins from the first track on the disc.
The frames above and below the track currently playing will
flash while the track is played and go out at the end of that
track.
The track currently Elapsed play
Flashes playing time
Play stops automatically when the last track on the disc fin-
ishes playing. (The display returns to the total number of
tracks and total playing time indications.)
Notes:
elf you press the CD play button instead of OPEN/CLOSE after
inserting a disc, the tray will close and play will start directly from
the track 1, but the total tracks and total playing time will not be
displayed.
©The total playing time which appears on the display includes the
time between tracks, hence there may sometimes be a difference
of several seconds between this time and the playing time indi-
cated in the liner notes that comes with the disc.

Technics SC-CH950 Specifications

General

Brand	Technics
Model	SC-CH950
Category	Stereo System
Language	English