Technics SC-CH950 User Manual

Changing
the
Tone
coninss
= Co) = ate
_—<=—= PEO =
5. C J /s=C I =
DNC _—s+V.BASS
—- Cc)
To listen with augmented bass
(V. BASS)
(Also available from the remote control)
While playing the desired source,
Press V. BASS to ON.
iv.eass
ram
V. BASS indicator will light, and the following display will appear.
Note:
You cannot make a recording with the V. BASS effect.
While recording, V. BASS indicator goes off, and after recording, it
will light again.
@ To cancel the V. BASS effect
(Also available from the remote control)
Press V. BASS once again to go off the V. BASS
indicator.
O-V.BASS
jar
V. BASS indicator will go off.
To reduce the noise on a tape or FM
stereo broadcast
(DNC—Digital Noise Cleaner)
Press DNC to ON.
Seon
DNC indicator lights.
Notes:
You cannot record with the DNC effect.
While recording, DNC indicator goes off, and after finishing, it will
light again.
@DNC may not be effective when you use with originally less-noise
product such as CD.
@DNC is not effective while the Dolby Pro-Logic system to ON.
For your reference:
\f you use DNC with a tape which was recorded with a Dolby NR (B
or C), noise reduction effect will increase.
@ To cancel the DNC effect
Press DNC once again to go off the DNC indi-
cator.
o——DNC
LD |
DNC indicator will go off.

Technics SC-CH950 Specifications

General

Brand	Technics
Model	SC-CH950
Category	Stereo System
Language	English