Technics SD-5948 User Manual

BAND
eeeeeeeeeerenerean
: TUNING
V DOWN uP A
-MANUAL -AUTO
D
eum eneeeseorese
MEMORY
«MANUA
| Listening fo radio broadcasts |
Sequential tuning EI
If the frequency is not known, use the tuning buttons for searching.
Press BAND to select “FM” or “AM”.
Press DOWN or UP to tune to the desired
broadcast.
Tuning intervals
FM: 0.2 MHz AM: 10 kHz
Automatic scanning
Press and hold DOWN or UP until the displayed frequency begins
to change.
e The changing of the displayed frequency will automatically stop if
a broadcast station frequency is located during the tuning process.
è When there is excessive interference, the automatic scanning may
not function.
To cancel the automatic scanning, press DOWN or UP once again.
Preset tuning
Presetting radio stations into the memory channels of this unit
makes selecting stations easy and simple.
A total of 30 FM and AM stations can be preset.
There are two methods for presetting broadcast frequencies in the
memory :the automatic method and the manual method.
Automatic memory presetting E
The broadcast frequencies of the selected band are automatically
preset into the memory: channels 1 to 30 are available for the
presetting of FM stations and channels 21 to 30 are available for AM
stations.
If the FM stations are preset and then the AM stations are preset,
the setting for FM channels 21 to 30 will be replaced by the AM
settings which were subsequently preset.
Press BAND to select “FM” or “AM”.
Set to the frequency from which you want to start
automatic memory presetting.
(Refer to “Direct tuning” or “Sequential tuning.)
Press and hold MEMORY until the frequency
begins to change.
(Automatic memory presetting will start.)
The frequency display and the preset channel number will be
displayed for approximately 1 second.
To stop, press MEMORY once again.
When presetting is completed
The last broadcast station to be preset will be displayed.
| Note | ’
Frequencies may not be preset correctly in cases where the
broadcast waves are too strong or too weak. In such cases, carry
out presetting manually.

Technics SD-5948 Specifications

General

Brand	Technics
Model	SD-5948
Category	Stereo System
Language	English