Technics SD-5948 User Manual

D
a
&
£
=
OC
o a
C=C
N 1 O | S | D L D ©
oS C
Specified track number
Program order
Listening to compact discs
Program play
Program play lets you playback your favorite tracks in the sequence
you want to hear them. The program can hold up to 32 steps.
[In the stop mode]
Press PROGRAM.
Press CD.
This will set the remote control to operate the CD changer.
Select the disc(s) you want with the numeric
buttons.
For example:
To select disc 3.
DISC — 3 — DISC ENTER
The “ALL” indication shows that all the tracks on the disc are
selected.
To program by means of disc numbers only, repeat the above
operation. (The count will increase by one for each
operation.)
You can select slot No. 0.
Press the numeric button(s) to specify the track.
For example:
To select track No. 20
210 — 2 —. 0
To program another track from the same disc, simply specify
the track No.
Repeat steps 3 and 4 unti! you have completed all
entries.
If you attempt a 33rd selection, the “PGM FULL” indication will
be displayed.
If you enter non-existing disc(s) or track(s), the corresponding
indicator illuminates and the entry is included in the count. In
the play mode, the changer will cancel the non-existing entry.
Press > to start play.
To enter additional selections during play, repeat steps 3 and
seoouneosues COPA SHE SEE DECOR ESHER SSR TESTUSHE ROOFS SHS ESSRESEESSEESHESTESEES ORE ESOT EES
To clear all programmed contents
[In the stop mode]
Press W.

Technics SD-5948 Specifications

General

Brand	Technics
Model	SD-5948
Category	Stereo System
Language	English