Technics SD-5948 User Manual

kez)
&
Š
=
a
DECK 1 $ 7
bays pe apes ogaad a
PLAY -5 =f0
a CRAAEENVERGARRUNECRUCEIACESEASESS
Indicates the side being played
BOOP T ORO R TESTE HR ESR UT ET USHO HEE SOROS RAFTS RSS FUSE ESHESEEREEHHEAOORESET SEES
VOLUME
me
| Listening fo tapes :
Type of tape which can be played on this unit:
Normal position/TYPET | O |
High position/TYPE I | O
Metal position/TYPEW [OO
The unit automatically identifies the type of tape.
The procedures described below are an example of playback on
Deck 1.
Press POWER of the amplifier and cassette deck.
Press SPEAKERS to turn on the speaker systems.
Press TAPE MONITOR.
Press 4 OPEN on Deck 1, and then insert the
cassette tape.
Push the cassette holder by hand.
To play back on Deck 2, in press the button ([4]) for Deck 2.
Press DOLBY NR to listen to tapes recorded by
Dolby B-type noise-reduction.
(Refer to “Dolby noise-reduction system” on page 31.)
Press REVERSE MODE to select the appropriate
reverse mode.
Each time the button is pressed, the indicator will change in
the order: —+_. -eO
+— : One side only.
CŽ : Both sides repeatedly (up to 8 times).
OO : Both sides, once only.
(Refer to “Reverse function” on page 31.)
Press > (or 4).
Playback will begin.
>: To begin from the forward side.
4: To begin from the reverse side.
8 Turn VOLUME to adjust the volume level. .
(Continued on next page)

Technics SD-5948 Specifications

General

Brand	Technics
Model	SD-5948
Category	Stereo System
Language	English