Technics SD-5948

Tape side indicator
L
a
a
DECK 1/2
Tape side indicator
-20 15
DECK © 7
Tape side indicator
| Listening to fapes .
Press DECK 1/2 to select the Deck (1 or 2).
Press 44 or PP.
Because
this
unit
is
capable
of
playing
back
both
sides
of
the
tape,
the
operation
changes
in
accordance
with
the
direction
of
the
tape
side
indicator.
è The tapes in Deck 1 and Deck 2 can be advanced or rewound at
the same time.
The tape counter indicates the amount of tape travel as a numerical
value based on the number of revolutions of the tape hub.
As you switch between Deck 1 and Deck 2, the tape counter shown
on the display changes too.
To reset the tape counter
Press COUNTER RESET.
The tape counter of the currently selected deck will revert back to
“000”, while that of the other deck will remain unchanged.
For your reference:
When the tape is traveling in the reverse direction, the value
displayed on the tape counter will count down.
After “000” is reached, the display will switch to “999” and will
then continue counting down.