Technics SJ-MD150 - AC Mains Lead Safety Precautions; United Kingdom Specific Safety; Fuse Replacement and Wiring Safety

Connections
OPTICAL
by IN2
Stereo phono cables
(included)
CD player, MD player,
DAT etc. (not included)
This
example
shows
the
unit
connected
to
an
amplifier
through
the
ANALOG
IN/OUT
terminals,
and
to
digital
equipment
(CD
player,
MD
player,
DAT,
etc.)
through
the
DIGITAL
OPTICAL
IN/OUT
terminals.
Before making connections, turn off all the components.
ANALOG IN / OUT terminals ]
Amplifier (not included)
Optical-fiber
cables (only one
cable is included)
AC mains lead
(included)
MD player, DAT etc.
(not included)
FOR UNITED KINGDOM ONLY
BE SURE TO READ THE CAUTION FOR THE
AC MAINS LEAD ON PAGE 3 BEFORE
CONNECTION.
Connect
the
ANALOG
OUT
terminals
to
PLAY
IN
terminals
on
an
amplifier to play through speakers connected to the amplifier.
Connect
the
ANALOG
IN
terminals
to
the
REC
OUT
terminals
on
an
amplifier
to
record
sounds
from
other
components
connected
to
the
amplifier.
Stereo phono cab
White (L) a) =
Red (RA)
DIGITAL
OPTICAL
terminals
|
Remove
the
dust-protection
caps
(@)
before
connecting
the
optical
fiber
cables.
Connect IN 1 and IN 2 to OPTICAL OUT terminals on other
playback components for digital recording to this unit.
Connect OUT to OPTICAL IN terminals on other recording
components to record from this unit.
7
DIGITAL
OPTICAL
terminals
not
in
use
should
be
covered
by
a
dust
protection
cap.
| AC IN terminal
Connect
to
a
household
mains
socket
(6)
with
the
AC
mains
lead.
Insertion of Connector
Even when the connector is perfectly
inserted, depending on the type of inlet
used, the front part of the connector
may jut out as shown in the drawing.
However there is no problem using the
unit.
This unit may interfere with radio reception so leave some distance
between it and your tuner.
Appliance inlet
Before use P|
5
RQT5411