Technics SL-BD22 User Manual

‘Itw o~otlcl twnt~ornnti sorint rwmbcrof this product cm bo fotmtl oittwror~
ttic back or bottom of the unit.
I%XISC rwtc them it) the space providad bclovr and retain this booktot as a
porrnartcnt record of your pwctm30 toaid itfcntificntiot3 in ttlocvcnt of thcfl.
MOOIII. NIJMt1111~
SI.“1W22
St:iiIAI. NIJMIWlt

Technics SL-BD22 Specifications

General

Drive Method	Belt Drive
Signal to Noise Ratio	50 dB
Dimensions	430 x 100 x 375 mm
Motor	DC motor
Effective Length	230 mm
Overhang	15 mm
Power Supply	AC 120V, 60Hz
Speeds	33⅓, 45 RPM
Turntable Platter	Aluminum Diecast
Rumble	-70 dB (DIN-B)
Tonearm Type	Straight tonearm
Platter	Aluminum Diecast
Tonearm	Static balance straight tonearm
Stylus Pressure Adjustment	Fixed

Summary

Suggestions for Safety

Turntable Assembly

Connections

Operation

Adjustment

Adjustment of the automatic-return position

Adjusts the tonearm's automatic return point if it doesn't return correctly or returns too soon.

Adjustment of the stylus-to-disc clearance

Adjusts stylus tip position, preset at factory, needed if cartridge or stylus is changed.

Replacement

Replacement of the stylus

Replace the stylus if noise is heard from new discs, indicating a worn stylus.

Replacement of the cartridge

Maintenance

Troubleshooting Guide

Technical Specifications

Precautions

Safety

Installation

Placement

Factory Servicenters Locations