Technics SL-DL1 Operating Instructions

@
For
normal
and
fast
outward
cueing
@
For
repeat
play
¢
The
tonearm
moves
outward
(towards
the
edge
of
the
e
Press
the
repeat
switch
and
the
repeat
indicator
LED
will
record)
as
long
as
you
keep
pressing
the
stop
switch
(for
turn
on
to
indicate
that
the
record
will
be
played
again.
longer than 1 second).
eas
A
repeat ‘. cueing ae) Start | siop cm
rom) ys Rip
repeat cueing aa start slop ce
P=) rr ¥
|
e
To
stop
the
repeat
cycle,
press
the
repéat
switch
again.
e
If
you
press
the
stop
switch
harder,
the
tonearm
will
move
«
Pressing
the
stop
switch
or
power
switch
will
also
stop
outward
faster.
:
repeat
operation.
ly ¥| cueing control
NY
@
For
raising
or
lowering
the
tonearm
during
play
repeat
cueing
as
slat
stop
me
e
When
you
press
the
cueing
control,
the
tonearm
rises
up
=
zt
from
the
record
surface.
¢ Press the cueing control again to lower the tonearm onto
the record surface and begin play again.
e If you press the stop switch intermittently, the tonearm will
move outward in small steps.
The tonearm will stop at the position it has reached when
you release the stop switch.
When you press the cueing control again, the tonearm will be
lowered onto the record and play will begin.
@ For auto-return or reject during play
sax) Start slop foe
e If you press the stop switch during play (without first ree cueing
pressing the cueing control}, the tonearm wif! rise and return —_—
to the start position and the platter will stop rotating.
« Auto-return (reject) operation will not take place if the stop
switch is depressed while the tonearm is raised above the
record surface,
repeat cueing a4) Start slop po

Technics SL-DL1 Specifications

General

Brand	Technics
Model	SL-DL1
Category	Turntable
Language	English