Technics SL-DL5 - Page 17

m@ REPLACEMENT PARTS LIST......Cabinet & Chassis Parts
Notes: 1. Part numbers are indicated on most mechanical parts.
Please use this part number for parts orders.
2. Important safety notice: Areas
Components identified by A mark have special
characteristics important for safety.
When replacing any of these components, use only
manufacturer's specified parts.
3. Bracketed indications in Ref. No. columns specify the area.
Parts without these indications can be used for ail areas.
4. The ‘'S" mark is service standard parts and may differ from
production parts.
5. [KKM -marked parts are used for black only, while
O-rmmarked parts are for silver type only.
m@ PACKINGS
1. Set the tonearm to the start position. 6. Plase the unit (with cushions attached) as
2. Attach the arm spacer. illustrated.
. Fold the flaps according to the line marks.
8. Seal the top with adhesive tape.
* Use gum tape or adhesive cloth tape of
50mm wide at least.
9. For the edges, first fold the flap ’‘a’’ and then
flap ‘“b’, and staple. Remember to staple
Black type model No. : SL-DLS5 (K)
* (E] is available in Switzertand and Scandinavia.
* [EK] is available in United Kingdom.
* (XL] is available in Australia.
* [EG] is available in F.R. Germany.
* (EB) is available in Belgium.
* [EF] is available in France.
* [XA] is available in Southeast Asia, Oceania, Africa,
Middle Near East and Central South America.
* [EH] is available in Holland.
* [Ei] is available in Italy.
~
6. Parts other than (KM -and O-marked are used for both
black and silver types.
Part Name & Description
* [EC] is available in Czechoslovakia.
Part No.
Part Name & Description
CABINET and CHASSIS PARTS
+
SFWECOSNO1
SFTGCOSNO1
SFUMCOSN11A
SFTECOSNO1A
45 Adaptor
Turntable Mat
Record Detector
Turntable
53 SFNHCOSX01 Label
TONE ARM PA
60
61
SFPAMO00501A
Tonearm
dust cover specer.
3. Attach the clamper, 45-adaptor holder and
4. Stick the protection sheet on the top of dust
only flap ‘‘b’’. (Use 15 or 16mm staple)
P1
SFPABOO501E Tonearm Position, Indicator cover.
62 SFPJLOOS01E Lift Plate Ass’y
© |SFACDO5NO1 Cabinet 63 SFPSP00504 Spring, Left
SFACDO5S21 Cabinet (Black Type) 64 SFPAB00502 Bracket, Tonearm
65 SFPSPO0503 Spring, Lead Wire
SFATCOSNO1A Hinge, Right Side 66 SFPCS00501 Cover, Arm Base
SFATCOSNO2A | Hinge, Left Side 67 SFDZCO5NO1 Cueing Plunger
68 EPC—P24S Cartridge
SFGCCO5N02 Cushion Rubber, Power Transformer] EPS—24CS Stylus
8 [XA] only SFGCCO5X01 Cushion Rubber, Power Transformer
9 SFDJHSC0492 Socket, AC Power :
9 [XA] only SFDJHSC04912 | Socket, AC Power Nt XTN3+6BFZ Screw, Tapping, ® 3x 6
N2 XTV3+6BFZ Screw, Tapping, ®3x6
SEDHCO5NO2E ‘| Socket, Input N3 XTV3+20BFN | Screw, Tapping, ® 3 x 20
SFOLDOSNO1 Socket, Remote Control N4 XTV3+8BFN Screw, Tapping, ®3x8 P7
SFUMCO5NO7A Record Size Detection Lever Me oe aia ®3x 10
plane lg Lbasabeaeh id ey N7 SFXGCOBNO3 [Screw 5. Put the set into the polyethylene bag and
SFDJCOSNO3E [Connector Ass'y (SP) N8 XTV3+20BFZ —_|Screw, Tapping, ® 3 x 20 then pack it as illustrated.
SFUMCO5N15 —_| Cover, Switch $301, 701 NQ SFXGCOBNO2 —_| Screw
SFQPCOSNO1 Spring, $702 N10 XTV3+8BFZ Screw, Tapping, ®3x 8
J N11 SFXGDOSNO1 Screw Al
© |SFKKDOSNO2 —_| Label, Speed Selector Nie Se, nS
WMEMISFKKDO5S21 —_| Label, Speed Selector (Black Type) | | N13 UNS ZORE NE. Screw, Tapeilw) 2 9. 20
N14 XSN3+5S Screw, Tapping, ® 3x5
SFKTDOSNO2 —_| Knob, Speed Selector M5 ie freer aR oo aa
SFUMDO5SNO3 —_| Guide, Speed Selector Knob mig RTS OBES + (tects epeigi 3610
SEKTCOSNO1E Knob, Start, Stop Ass’y N17 XSN26+10BV Screw, Tapping, ® 2.6 x 10
SFKTDOSNO1 | Knob, Power NIB ee etbe Was igs
SFMZDO5NO1Z {Stator Frame Ass’y be mApESEE. ileal ie
O |SFADDOSNO1E Dust Cover ACCESSORIES
= SFADDO05S21E Dust Cover (Black Type) A1[EK, XL] SFNUDO5G01 Instructions Book, Printed Matter
Al [XA] SFNUDO5X01 Instructions Book, Printed Matter
SFGCDO5NO1 Cushion Rubber (A) A1 [EG] SFNUDO5RO1 Instructions Book, Printed Matter
SFGCCOS5N03 Cushion Rubber (B) Al [EF] SFNUDO5F01 instructions Book, Printed Matter
SFGCCO5NO06 Cushion Rubber (C} Al [Ei] SFNUDOSi01 Instructions Book, Printed Matter
SFKKDOSNO1 Surface Plate A1 (Other Areas] SFNUDOS5S01 Instructions Book, Printed Matter
SFAUDO5NO1 Bottom, Board
SFGACO5NO01 Audio Insulator A2 SFDHCO5NO1 Phono Cord
SFQCCOSNO1 Spring, Audio Insulator A3 SFDLCO5NO1 Ground Wire
SFUMDOS5NO1 Cover, Rest Switch Plate
SFUMDO5NO2 Cover, Right Side A4 [EK] RJA43Z AC Cord
SFUKDOSNO1A Arm Drive Plate A4 [XL] RJA26Z AC Cord
SFUMCO5N20 Guide, Lead Wire A4 [Other Areas] RJA20Z AC Cord
SFUZCOSNO03 Latch
SFMHCO5NO1E — | Arm Drive Motor A5 [XA] only SFDKi19118 2P Plug
SFGBC10-—01 Belt, Arm Drive (With Pulley) AG SFUMCO5N24 Adaptor, 25 cm Record
SFGCCO5NO1 Cushion Rubber
SFUMCOSN16A —_|Worm Ass’y PACKING PARTS
SFUMCO5N17 Arm Drive Wheel
SFUZCO5NO2E —_|Arm Drive Rope Ass'y Pt [EF] ©. SEHPOOBCO! Carton, Box
SEUMCO7_22
taper,
Pulley
P1
[Other
Areas]
SFHPDOSMO1
Carton;
Box
5~
15mm
SFUMCO5N22 Pulley P41 [Ky SFHPDO5M21 Carton, Box {Black Type)
SFUMCO5NO2E Plate, Rest Switch
SFUMCO5N23 Stopper, Pulley P2 SFHHDOSNO1 Pad, Front
SFUZCOSNO1 Rod, Rest Switch P3 SFHHDOSNO2 Pad, Rear
SFXJCO5NO1 Guide Rail P4 SFHDDOS5NO}1 Sheet, Turntable
SFGCCO5NO05 Cushion Rubber PS SFHKCOSNO1 Screw, Clamp Accessories
SFUPCO5NO3
Plate,
Guide
Rail
P6
SFHKCOSNO2
Spacer,
Tonearm
50mm
52 [E]
52 [EK, XL]
52 [XA]
52 (Other Areas]
SFGCCO5NO04
SFNNDO5S01
SFNNDO5G02
SFNNDO5X01
SFNNDOSRO1
Cushion Rubber
Name Plate
Name Plate
Name Plate
Name Plate
P7
P8
Pg
P10
PH
SFHSDO5NO1
SFHSCO5NO02
SFYH60X60
SFYH15X20
SFY FO5A06
Spacer, Dust Cover
Stopper, 45 Adaptor
Polyethylene Bag, Unit
Polyethylene Bag, Accessory
Polyethylene Bag, 25 cm Record
Adaptor
Printed in Japan
82029800 ) AM/YW