Technics SL-PD1010 - Page 15

This function is convenient to use when searching for a desired
track.
The function will search from the beginning of the track for a loud
section, and will play 10 seconds of the track centering around
that point.
The order of scanning is the same as for piay mode.
You can search rapidly forward or backward on the disc for
specific sections.
• 4-4 SEARCH ►►
10 SCAN
Press ID SCAN.
ID scan will start.
i , i ■
BSC MIN
illuminates
4-4 search [in the play or pause mode]
l.— - ■ ! Press and hold or
You can search backward.
You can search forward.
Release the button when you reach the
desired point.
The changer wilt return to the previous mode
(play or pause).
When the desired track has been found:
Press ► .
The changer will play the track from the begin¬
ning.
In sequential play mode:
You can search forward over discs and backward within the cur¬
rent disc.
In other piay modes:
You can search forward or backward only within the current
track.
To cancel ID scan
Press ID SCAN while this function
Is In operation.
The “ID” indicator wilt go out.
The changer will continue to play from the track being played.
For your reference:
The search function will begin slowly, and then, if the button Is
held pressed for longer than 3 seconds, it will change to high¬
speed search.
In the play mode, the sound level decreases by 12 dB (1/4).
ID SCAN
Parade scan
Parade scan means an ID scan which is carried out in
memory reserve mode. It lets you play a number of tracks in
succession without playback being stopped in between
tracks, and also adds fade-in and fade-out effects, it is thus
possible to obtain the overall effect of listening to a hit-parade
of songs.