Technics SL-PD1010 - Page 17

Auto cue function
Play will continue endlessly in accordance with the specific play
mode selected.
REPEAT
The auto cue function allows the unit to wait in a standby condi¬
tion at the beginning of each track so as to start play right when
you are ready.
When each track finishes playing, the unit skips to the beginning
of the next track and switches to the play standby mode.
REPEA T
[Before or during play]
Press REPEAT.
s? c /> / n n 9
l ( , / DISC CJ TRACK
: n n • n n
U U • U U
MW SEC
Illuminates
AUTO CUE
Press AUTO CUE.
11 in
OHC U
n n ■ n n
u u • u u
MN SEC
A.CUE
Illuminates
In sequential play mode:
All tracks of all discs will be played repeatedly.
In program play mode:
The changer plays only the programmed selections in the pro¬
grammed sequence repeatedly.
In delete play mode:
The changer plays the discs and tracks excluding the selections
to be deleted repeatedly.
In random play mode:
When the changer has played all the tracks on all the loaded
discs, it will select a new random sequence and play continuous¬
ly. The sequence differs each time.
In spiral play mode:
The changer plays all tracks of all discs repeatedly in the se¬
quence of spiral play.
Press ► .
The changer switches to the piay
standby mode at the beginning of the
track.
Press ► again to start play.
Press ► at the beginning of each
track.
To cancel repeat mode
To cancel auto cue mode
REPEAT
Press REPEAT again.
The “ O " indicator will go out.
AUTOCUE
Press AUTO CUE.
The "A.CUE" indicator will go out.
EBBS
The auto cue function may not cause the unit to wait exactly at
the beginning of a track if the track begins with a very soft
passage or if there is a lot of background noise.