Need help?Do you have a question about the Technics SL-Q2 and is the answer not in the manual?
General| Drive System | Direct drive |
|---|---|
| Speeds | 33 1/3 and 45 rpm |
| Wow and Flutter | 0.025% WRMS |
| Signal-to-Noise Ratio | 78dB (DIN-B) |
| Effective Length | 230mm |
| Overhang | 15mm |
| Platter | Aluminum die-cast |
| Tonearm Type | Static Balanced |
| Rumble | -78dB |
List of included components for assembly and setup.
Procedure for placing the turntable platter on the center spindle.
Procedure for inserting the headshell into the tonearm.
Procedure for placing the balance weight on the tonearm.
Steps to balance the tonearm and set stylus pressure.
Setting the anti-skating control to match stylus pressure.
Adjusting the distance between stylus tip and record.
Adjusting tonearm return timing for record playback.
Steps for placing records, starting, and stopping playback.
Procedures for stopping and suspending the playback process.
Instructions for playing records with a large center hole.
Guide for replacing the stylus tip.
Procedure for installing a new cartridge and headshell.
Adjusting the cartridge overhang for optimal tracking.
To Next Page
