Technics SX-K350

m@
Using
Play
Sequencer
and
PCC
together
The
contents
of
the
Play
Sequencer
(#S)
and
Program
Chord
Computer
(
#@@
)
can
be
combined.
It
is
possible
to
add
a
melody
toa
PCC
chord
progression.
It
is
also
possible
to
alter
one
part
of
the
PCC
by
replacing
it
with
a
Play
Sequencer
recording.
It
is
first
important
to
understand
that
the
Play
Sequencer
has
priority
over
Program
Chord
Computer.
The
accompaniment
played
back
by
the
PCC
is
actually
the
bass
and
left
sections
being
automatically
played
by
the
keyboard’s
computer.
Therefore, as an example, if the #S bass button is flashing
(record mode) or on (playback mode), then the bass notes
will not be heard when playing back the PCC accompani-
ment. Only the accompaniment (left) section is heard.
Conversely, if the #S left button is on or flashing, then the
PCC will play back only the bass notes. If both the bass and
left @S buttons are on or flashing, then chords stored in the
PCC will not be heard.
(1)
Adding
a
melody
to
a
PCC
accompaniment
Record
or
playback
of
the
right
and
solo
sections
of
the
Play
Sequencer
does
not
affect
PCC.
Therefore
the
PCC
can
provide
an
accompaniment
while
you
record
a
melody.
@ To add a melody to PCC:
1. Record achord progression into the PCC.
2. Press KM (Be sure the PCC button is turned on
first.)
3. Press the right or solo #S button. The button will flash
slowly.
. Press the button to begin PCC playback.
. Play the part to be recorded.
. When the song is completed, press the button to
exit the record mode.
ous
e Parts can be stored in both the right and solo sections. In
this case, make sure that the solo presets button in the
Orchestral Conductor is turned off while recording the
right part.
e |f the Play Sequencer bass and left buttons are turned on,
those parts will not be played back by the PCC, since Play
Sequencer has priority over Program Chord Computer.
@ When playing back a performance recorded in this
fashion, the ?@@, right, and/or solo buttons must be
turned on.
(2) Altering a PCC accompaniment
A PCC accompaniment consists of two parts, bass and
accompaniment (left). As an example, you might want to add
your own bass part to an existing PCC accompaniment. This
is accomplished as follows:
1. Record achord progression in PCC in the normal fashion.
2. Press MESH .
3. Press the #S bass button. The light wil! slowly flash.
4. Press the button to begin playback of the PCC
chord progression.
. As soon as PCC playback begins, play the new bass part
on the keyboard.
6. When the performance is completed, press to exit
record mode.
on
e The accompaniment (left) section can be changed the
same way. Just press the #8 left button in Step 3. The rest
of the procedure is the same.
@ When changing the accompaniment section, be sure to
first select one of the three accompaniment vai ces (organ,
string ensemble or guitar).
@ To play back a PCC accompaniment which has been
changed by this method, both the #@@ button and the
?S button for the part that has been changed must be
turned on.
e Right and solo sections can be added as previously
explained.