Technics SX-KN550

Part Ill
Sequencer
Recording your performance
Here is an outline of the steps you follow to record your performance in the SEQUENCER.
Recording procedure
1. Set the sound, effects, volume, etc., for the
track you want to record.
2.in the SEQUENCER section, press the
RECORD button to turn it on.
RECORD
°
e The track indicators flash rapidly.
3. Press the track button for the track you are
going to record.
KN550
SEQUENCER
ae
STEP
REC
POLY
1
POLY
2
icHORO
KN650
SEQUENCER cco
sda pe er a ISHORD
OOO OO
STEP REC ACCOMP2 ACCOMP3 DRUMS CONTROL
° fe] ° ° fe]
OOO O®D
e The indicator for the selected track flashes
slowly, and the indicators for the other tracks
go out.
e If both POLY 1 and either POLY 2 or POLY 2
TO LEFT are on in the CONDUCTOR, you can
record the POLY 1 and POLY 2 tracks simul-
taneously by pressing both track buttons.
4. Play the keyboard.
Recording starts.
e Another way to begin recording is to press the
START/STOP button to start the rhythm.
e You can record at a slow speed and play back
at a higher speed. The pitch does not change.
e KN650: During recording, the display appears
as follows:
Actual part name
REAL jJ=120
M 3
tart hee
PLY1
55%
Remaining memory
capacity
5. When you have finished recording the track,
press the RECORD button to turn it off.
Playback procedure
1. Confirm that the indicator for the track you
recorded is lit.
e Ifthe indicator is not lit, press the track button
to turn it on.
2. Press the SEQUENCER RESET (FILL IN 1)
button. FILL IN 1
Q
SEQUENCER RESET
e The SEQUENCER returns to the beginning of
the song and the beginning panel settings are
recalled.
39
3. Press the START/STOP button to turn it on.
START/STOP
e The recorded performance is played back auto-
matically.
e You can change the playback tempo with the
TEMPO buttons.
e If the START/STOP button is pressed during
playback, the performance stops. Pressing the
START/STOP button again will cause the per-
formance to continue from the point it was
stopped. To return to the beginning of the per-
formance, press the START/STOP button to
stop the playback, and then press the SE-
QUENCER RESET button.
n
=
°
=
©
oO
Q
Q.
w
ie)
°
=
o
©
he
Qo.