Technics SX-KN550

n
c
fe)
=
1°)
2
rey
a
o
rs)
oO
=
oO
ie)
ha
o
Part
Ill
Sequencer
Multi-track recording
When
recording
several
tracks,
you
can
record
one
track
while
listening
to
the
track
or
tracks
already
recorded.
m Record the following example in the SEQUEN-
CER with the multi-track recording method.
POLY 1
(01 PIANO 2)
POLY 2
(43 JAZZ ORGAN 1)
Multi-track recording procedure
m Record the POLY 1 track.
1.In the SEQUENCER section, press the ¢ To play back your performance, refer to page
RECORD button to turn it on. 39.
e Inthe same way, you can record the ACCOMP,
2. Press the POLY 1 track button. BASS (KN650) and DRUMS (KN650) tracks.
3. Set the sound, effects, volume, etc., for POLY
1.
4. Play the POLY 1 part on the keyboard.
\f the recording procedure is followed for a
track which is already recorded, the pre-
viously stored performance is erased and
the new performance is recorded.
m Record the POLY 2 track. : You can erase the SEQUENCER contents.
1.In the SEQUENCER section, press the When you wish to redo a performance or
RECORD button to turn it on. begin a new performance, first erase the
recorded contents. (Refer to page 44.)
By using the SONG SAVE/LOAD function,
you can keep the contents of the performan-
ces in the memory. (Refer to page 49.)
The SEQUENCER contents are preserved
even if the PLAY button is turned off, as
long as power is being supplied through the
AC adaptor or the batteries.
5. When you have completed recording the POLY
1 part, press the RECORD button to turn it off.
2. Press the POLY 2 track button.
3. Set the sound, effects, volume, etc., for POLY
2.
4. Press the START/STOP button to turn it on.
5. Play the POLY 2 part on the keyboard in time
with the POLY 1 part.
6.When the POLY 2 part ends, press the
RECORD button to turn it off.
40