Technics SX-PC15 User Manual

How to use
1
“|
4
4
Plug. the power cord into.the wall
socket.
Install. the music. stand. (included).
e Insert it into the two holes.
Open the keyboard cover.
e Open and close the cover genily.
Turn on the POWER button.
(J
(Left side of keyboard)
e The indicator lamp at the left on the
front of the piano lights up when
power is on.
e You can now play the keyboard for a
piano performance.
Adjust the loudness with the VOLUME
control.
(Beneath the keyboard, left side):
e One or two headphones sets can be
connected to the PHONES jacks.
(The speakers are automatically
switched off.)
Add reverberation. = |
Turn on the DIGITAL REVERB button.
SHLOFF wa ON
Se
DIGITAL
REVERB
x
ied
_
[e)
=z.
uu
(Right side of keyboard)
Listen to the demonstration.
1 | Turn off the power once.
2 While pressing the lowest (leftmost)
key on the keyboard, turn on the power
again.
« Two demonstration tunes are
automatically played. (Refer to page
29.)
e The tunes are repeated until the
power is turned off again.
Pedals ;
Sustain pedal
Soft pedal
Sustain pedal
The sound fades gradually after the keys
are released.
Soft pedal
The tones are softened, and the volume is
slightly lower.

Technics SX-PC15 Specifications

General

Brand	Technics
Model	SX-PC15
Category	Musical Instrument
Language	English