Figure-12
Assembly
1. Insert the rear part of the top panel of speaker into ditch of the
cabinet.
2. Set the top panel of speaker box by the screw A( as shown in
Figure-12 ).
8.9. Removing the 20cm and 6.5cm speaker
1. Remove the Top panel of Speaker box (see step ”Removing The
Top panel of Speaker box ”).
2. Remove the 14 cm speaker mounting nuts (C × 8 pcs.).
3. Remove the 6.5 cm speaker mounting screws (B × 8 pcs.).
Figure-13
12
To Next Page
Loading...
