Technics SX-PX222/M

Reverb depth
The depth of the DIGITAL REVERB can be adjusted for each reverb type.
1. Select a type of DIGITAL REVERB.
DIGITAL
REVERB
OROOM
OSTAGE
OHALL
2. While pressing the MODE SET button, press the
DIGITAL REVERB button.
MODE DIGITAL
SET REVERB
OROOM
OSTAGE
OHALL
e The indicator corresponding to the reverb type
selected will flash.
String resonance
3. Use the TEMPO buttons to adjust the depth of the
reverb.
Nm
o The current reverb depth (1-10) is shown on the
display.
e Each press of the A button increases the reverb
depth, and each press of the V button decreases
the reverb depth.
e To return instantaneously to the standard reverb
depth, press the two TEMPO buttons at the same
time.
4. When you have finished adjusting the reverb depth,
press either the MODE SET button or the DIGITAL
REVERB button.
• The depth of the other DIGITAL REVERB types
can be adjusted in the same way.
String resonance is the sound heard in an acoustic piano when the struck strings produce a sympathetic resonance
of the other unstruck strings. For the GRAND and UPRIGHT sounds, string resonance is produced as long as the
sustain pedal is depressed. The amount of string resonance can be adjusted, and is common for all the sounds.
e String resonance cannot be heard if DIGITAL REVERB is set to on.
1. Press and hold the GRAND button for about 3
seconds.
SOUND
Eu ШЕТ EPAD. 06 HARPSI ORGAN
000006
2. Use the TEMPO buttons to adjust the amount of
resonance (0—10).
TEMPO
QÔ
VALUE
=
2
10
e Each time the A button is pressed, the resonance
increases. Each time the ¥ button is pressed, the
resonance decreases.
e When set {о 0, there is no string resonance.
o Pressing both buttons at the same time will return
the instrument to the standard resonance.
3. When you have finished adjusting the string
resonance, press the GRAND button again.