Technics SX-PX5

Initial setup instructions and connection of essential accessories for playing the digital piano.

Select from five different PCM digital sound sources including piano and electric piano.

Adjust the tone's brightness by pressing the bright or mellow buttons.

Utilize pedals for sound sustain and softer volume control.

Apply tremolo and chorus effects to add depth and character to the sound.

Change the musical key to match vocal ranges without altering the song's melody.

Store and automatically playback performances, effect settings, and key touches.

Layer multiple musical parts sequentially by recording into different song memories.

Instructions for playing a pre-loaded musical piece stored in the piano's memory.

Store tunes and performances on a digital memory disk using the optional SY-FD5 unit.

Overview of available optional accessories and rear panel connection terminals.

Important safety guidelines for installation, power, and handling to prevent damage or injury.

Description of MIDI IN/OUT terminals for data communication with external equipment.

Setting MIDI functions for proper communication between the piano and other devices.

Procedure to reset MIDI, tone, and effect settings to their initial factory condition.

Configure MIDI functions like Omni mode, channel assignment, and message transmission/reception.

Chart illustrating keyboard layout, ranges, and MIDI note number correlations.

Chart showing the relationship between keyboard keys and their corresponding MIDI note numbers.

Select playback mode for song memories to control piano or external MIDI instruments.

Detailed chart outlining MIDI message transmission and reception capabilities of the SX-PX5.

Details on MIDI IN/OUT/THRU terminals for connecting external MIDI devices.

Configuring MIDI functions for external instrument communication on PX7/PX9 models.

Resetting MIDI, tone, and effect settings to their factory default state.

Setting up MIDI functions such as Omni mode, channel assignments, and message types.

Configure song memory playback to control piano or external instrument sound output.

Chart illustrating keyboard layout, ranges, and MIDI note number correlations.

Control two external instruments (A/B) using the piano keyboard split with octave shifts.

Define the split point on the keyboard to divide it for controlling different MIDI instruments.

Change external instrument tones by sending program change messages from the piano.

Methods to send program change messages using tone selector buttons or the keyboard.

Preset MIDI functions and program changes for one-touch recall.

Recall preset MIDI data and send program changes to external instruments.

Configure song memory playback to control piano or external MIDI instruments.