Technics SX-PX222/M

B Record TRACK 1.
1 Select the sound and set the DIGITAL EFFECT to
on or off
2 Press the RECORD button to turn it on
SEQUENCER
START/STOP [RECORD] EE TRAK ник:
2006
The TRACK 1 and 2 indicators flash rapidly
The tempo setting will appear on the display
3 Press the TRACK 1 button
TRAK 1
Ó
The TRACK 2 indicator goes out and the TRACK 1
indicator flashes slowly
4 Play the TRACK 1 part
e Recording starts when you begin to play the
keyboard
e Recording will also begin if the START/STOP button
Is pressed In this case recording begins after a
one-measure count
5 When you have completed recording the TRACK 1
part, press the RECORD button to turn it off
RECORD
о
Ё
• Recording will also stop if the START/STOP button
iS pressed
e The indicator for the recorded track changes from
flashing to the lit condition
Ш Record TRACK 2.
1 Select the sound and set the DIGITAL EFFECT to
on or off
2 Confirm that the TRACK 1 indicator is lit
e Ifitis not ht, press the TRACK 1 button to turn it on
3 Press the RECORD button to turn it on
SEQUENCER
SWFVSTOP (ЕЕЕ TRAK TRAK 1 me
OW00
e The TRACK 2 indicator flashes rapidly
4 Press the TRACK 2 button
TRAK 2
В
• The TRACK 2 indicator flashes slowly
13
5 Play the TRACK 2 part
e Because the part already recorded in TRACK 1 is
played back automatically, you can play the TRACK
2 part in time with it
e Recording will also begin if the START/STOP button
IS pressed In this case recording begins after a
one-measure count
6 When you have completed recording the TRACK 2
part, press the RECORD button to turn it off
RECORD
о
E