Technics SX-PX226/M

Setting the functions
You can set various functions, for example, the type of tuning, or how the sound is produced when the
keys are pressed very slowly.
Settings which can be adjusted
| Function on (when indicator is lit) off (when indicator is not lit)
Standard acoustic piano tuning, in which | Standard equal temperament.
the lower pitches are tuned slightly lower
PANG TENING and the higher pitches are tuned slightly
higher (default setting).
No sound is produced when a key is | Sound is produced regardless of how
played extremely softly (default setting). | softly the keys are pressed.
Procedure
While pressing the MODE SET button, turn the
desired function on or off by pressing the relevant
button.
e When changing the settings, the panel buttons
function as shown in the illustrations.
MODE SOUND
SET Ri
GRAND UPRIGHT ROCK EPANO! EPAHO2 HARPSI VIBES STRINGS VOCAL PRESETS
i 1000055086
о Initialization
If the INITIAL key on the keyboard is pressed e While the MODE SET button is depressed,
while the MODE SET button is depressed, all the keyboard keys do not produce sound.
settings return to their default status. e When the MODE SET button is pressed, the
e The TRANSPOSE indicators will flash at this MIDI CHANNEL number (refer to page 19) is
time. shown on the display.
e Note that when you perform the initialization
procedure, the tracks which have been
memorized by the SEQUENCER will also be
cleared.
16