Need help?Do you have a question about the Technics SU-V3 and is the answer not in the manual?
General| Signal-to-Noise Ratio (line) | 100 dB |
|---|---|
| Input Sensitivity (MM) | 2.5 mV |
| Input Sensitivity (line) | 150 mV |
| Output (line) | 150 mV |
| Type | Integrated Amplifier |
| Input Impedance | 47kΩ |
| Speaker Load Impedance | 4Ω - 16Ω |
| Dimensions | 430 x 125 x 288mm |
| Power Output | 2 x 30W (8Ω) |
Detailed specifications for the amplifier section, including power output and distortion.
Geographic regions where specific product versions are available.
Important note regarding the operation of the unit's protection circuitry.
Describes the muting/relay drive IC and its functions.
Instructions for removing the main cabinet and bottom board.
Instructions for removing the front panel assembly.
Steps to adjust the idling current of power transistors.
Procedure for calibrating the fluorescent peak power meter.
Covers DC balance checks and overload detection circuit functionality.
Schematic for the FL peak power meter circuit.
Details the power source circuit for specific geographic regions.
List of diode part numbers used in the schematic.
Identifies all parts related to the cabinet and chassis.
Lists components included in the product packaging.
Details the types and quantities of fasteners used.
Lists any included accessories.
To Next Page
