Need help?Do you have a question about the Technics SU-V670 and is the answer not in the manual?
General| Type | Integrated Amplifier |
|---|---|
| Damping Factor | 60 |
| Channel Separation | 55dB (line) |
| Speaker Load Impedance | 4Ω to 16Ω |
| Input Sensitivity Line | 200mV |
| Input Sensitivity | 2.5mV (MM) |
| Signal to Noise Ratio | 86dB (MM) |
| Dimensions | 430 x 139 x 363mm |
| Signal to Noise Ratio Extended | 86dB (MM), 72dB (MC) |
Details the included AC power supply cord for the unit and its connection.
Important warnings regarding electrical connections, water spills, and shock hazards.
Guidelines on safe placement, handling, use around children, and chemical avoidance.
Procedures to follow if the unit experiences abnormal operation or trouble.
Instructions for connecting turntables to the PHONO terminals, including short-circuit pins.
Guidance on connecting CD players to the CD terminals for audio output.
Instructions for connecting tuners to the TUNER terminals for radio broadcasts.
How to connect auxiliary devices like video disc players to the AUX terminals.
How to connect tape decks and digital audio tape decks to TAPE 1 and TAPE 2/DAT terminals.
Instructions for connecting components directly to POWER AMP DIRECT for superior tone quality.
Guidelines for connecting main (A) and second (B) speaker systems to the unit.
Steps for safely connecting the AC power supply cord after all other cables are connected.
Description of the power switch, operation indicators, and their functions.
Details on using the input selector and recording output selector for sound sources.
Explanation of volume control, loudness, tone controls, and balance adjustment.
Information on speaker selectors and the headphones jack for audio output.
Steps for listening to phono discs and tapes, including volume and input selection.
How to listen to components connected via POWER AMP DIRECT, bypassing other controls.
Guidance on adjusting volume, tone quality, and other settings after playback begins.
How to select the correct phono cartridge type (MM or MC) for optimal playback.
Using stereo/mono modes and tone controls (bass, treble) for desired sound.
Recommendations for listening through headphones, including volume and speaker selection.
Steps for recording from compact discs, tuners, phono discs, and AUX devices.
How to listen to the source being recorded or a different source.
Instructions for making tape-to-tape recordings between connected tape decks.
Detailed specifications for continuous power output and total harmonic distortion.
Specifications for frequency response across different inputs and tone control ranges.
Details on input sensitivity, impedance, signal-to-noise ratios, and damping factor.
Information on power consumption, power supply, dimensions, and weight.
Explanation of the protection circuitry's purpose and when it may operate.
Steps to identify and correct causes for the protection circuitry activating.
Solutions for problems like lack of clarity, volume, or poor high-frequency response.
Troubleshooting steps for no sound, reversed channels, or low-depth stereo sound.
Addressing issues like hum noise, no sound from one speaker, or sound stopping during playback.
Guidelines for cleaning the unit using soft cloths and mild solutions.
Warning against using alcohol, paint thinner, or treated cloths that can damage the finish.
To Next Page
