Need help?Do you have a question about the Technics SU-V6X and is the answer not in the manual?
General| Input Sensitivity | 2.5mV (MM), 150mV (line) |
|---|---|
| Signal-to-Noise Ratio | 86dB (MM), 106dB (line) |
| Dimensions | 430 x 150 x 360mm |
| Weight | 10.5kg |
| Speaker load impedance | 4Ω to 16Ω |
| Signal to noise ratio | 86dB (MM), 106dB (line) |
| Type | Integrated Amplifier |
| Total Harmonic Distortion | 0.005% |
| Damping factor | 60 |
| Channel separation | 55dB (line) |
| Power Output | 80 watts per channel into 8Ω (stereo) |
Details rated power output, harmonic distortion, frequency response, and IM distortion for amplifier performance.
Guides for safely removing power transistors and front panel controls.
Procedure for setting the amplifier's quiescent current (bias) for optimal operation.
Procedures for verifying muting, overload detection, and DC detection circuits.
Layouts for speaker impedance and power switch circuit boards.
Component layout for the main power amplifier board.
Component layout for the speaker selector circuit board.
Layouts for tone control, input selector, and input indicator boards.
Layouts for output terminal, computer control, and volume boards.
Layouts for these specialized function boards.
Visual system flow and detailed input selection circuit.
Detailed circuit diagrams for power, protection, and audio amplification.
Detailed circuit diagrams for various functional blocks.
Detailed circuit diagrams for control and speaker output selection.
Information on impedance settings and power switch operation for safety.
To Next Page
