Need help?Do you have a question about the Technics SU-V85A and is the answer not in the manual?
General| Power Output | 120W per channel into 8Ω (stereo) |
|---|---|
| Frequency Response | 3Hz to 80kHz |
| Dimensions | 430 x 125 x 316mm |
| Weight | 9.1kg |
| Signal to noise ratio | 86dB (MM), 106dB (line) |
| Input Impedance | 47kΩ |
| Damping factor | 60 |
| Input sensitivity | 2.5mV (MM), 150mV (line) |
| Channel separation | 70dB |
| Speaker load impedance | 4Ω to 16Ω |
| Signal-to-Noise Ratio | 110dB |
Detailed performance, power, and distortion specifications.
Steps to remove the front panel and sub PCB.
Steps to remove the input/output PCB.
Steps to remove the main P.C.B.
Explains protection circuit function and reset procedure.
Procedure for adjusting voltage amplifier idling current.
Procedure for adjusting current amplifier idling current.
Schematic for the main circuit board.
Pin functions for IC701 controlling analogue switches.
To Next Page
