Need help?Do you have a question about the Technics SU-V900 and is the answer not in the manual?
General| Frequency Response | 3Hz to 80kHz (±3 dB) |
|---|---|
| Input Impedance | 47 kΩ |
| Dimensions | 430 x 158 x 370mm |
| Weight | 11.2kg |
| Signal-to-Noise Ratio | 86dB (MM) |
| Damping Factor | 60 |
| Input Sensitivity | 150 mV |
| Channel separation | 70 dB |
| Speaker load impedance | 4-16Ω |
| Total Harmonic Distortion | 0.007% |
| Signal to noise ratio | 76dB (MC), 86dB (MM), 106dB (line) |
Guidelines for safe AC power usage, avoiding DC, and ensuring proper ventilation.
Warnings about child safety and prohibiting unauthorized repairs to prevent electric shock.
Steps for handling water spills, troubleshooting problems, and contacting service.
Explains the power switch, operation indicators, tone control switch, and tone/balance adjustments.
Step-by-step guide for playing phono discs or tapes, including initial settings.
Detailed technical specs for the main amplifier section, including power output and distortion.
Explains the unit's protection circuit, its triggers, and how to reset it after an issue.
Solutions for problems related to sound clarity and high-frequency response during disc playback.
Troubleshooting steps for common issues like no sound, reversed stereo, hum, or speaker problems.
To Next Page
