Technics SX-PX552 - Sound Effects and Resonance; Reverb Depth Adjustment; String Resonance Adjustment

Reverb depth
The type and depth of the DIGITAL REVERB can be adjusted for each sound.
1. Select a sound.
2. Select a tvpe of DIGITAL REVERB.
3. While pressing the MODE SET button, press
the DIGITAL REVERB button.
MODE DIGITAL
SET REVERB
© ROOM
xi
Ош
онш
© CONCERT
e The indicator for the selected type flashes.
4. Use the TEMPO buttons to adjust the depth
of the reverb.
JO
e The current reverb depth (1—10) is shown on
the display.
e Each press of the A button increases the
reverb depth, and each press of the V button
decreases the reverb depth.
e To return instantaneously to the standard
reverb depth, press the two TEMPO buttons
at the same time.
5. When you have finished adjusting the reverb
depth, press either the MODE SET button or
the DIGITAL REVERB button.
String resonance
String resonance is the sound heard in an acoustic piano when the struck strings produce a sympathetic
resonance of the other unstruck strings. Forthe GRAND (PX552)/ CONCERT GRAND (PX554), UPRIGHT
and POP GRAND (PX554) sounds, string resonance is produced as long as the sustain pedal is
depressed. The amount of string resonance can be adjusted, and is common for all the sounds.
« When the DIGITAL REVERB is on, there is no string resonance.
1.Press and hold the GRAND (PX552)/ CON-
CERT GRAND (PX554) button for about 3
seconds.
SOUND
cio дәт ЕРИ! SOI nee vers PME VOCAL 8
100000001
(PX554)
CONCERT
-0-
2.Use the TEMPO buttons to adjust the amount
of resonance (0-10).
E.
13
e Each time the A button is pressed, the
resonance increases. Each time the W button
is pressed, the resonance decreases.
• When set їо 0, there is no string resonance.
e Pressing both buttons at the same time will
return the instrument to the standard
resonance.
3.When you have finished adjusting the string
resonance, press the GRAND button again.