Technics SX-PX552

The following MIDI functions can he set.
The DIGITAL EFFECT button and some of the
SOUND buttons, when used in conjunction with
the MODE SET button, serve to set the following
MIDI functions.
corresponds to the selected sound as
indicated on the panel (default status).
«|n the initialized state, the MIDI channel and sound assignment that can be used
on this instrument is as shown below (PX554: the ORGAN PRESETS becomes
the sound that is selected at that time).
PX552 SOUND
РРЕ
GRAND © UPRIGHT ЕРАМО1 EPIANO2 НААРЫ уз STRINGS ORGAN
o o o o o o о
— рм —
PX554 SOUND
perd jure EPANO1 ЕРАМО2 HARPSI ves FANS WEN.
ШШЕ ШП!
eWhen the power is turned on or when this instrument is initialized, the sounds
| Function | on (when indicator is lit) off (when indicator is not lit)
The piano can be used as a multiple | This piano cannot be used as a multiple
MULTI
TIMBRE
for each channel that were changed by receiving PROGRAM CHANGE numbers
return to the sounds indicated on the panel.
sound generator, and data can be sound generator. Data can be received
Data is received for all MIDI channels. |Data is received only on MIDI channels
| which are matched (default status).
eFor assigning this instrument’s MIDI
| channels, refer to page 19. |
received on each MIDI channel. only on the set MIDI basic channel. In
this case, the produced sound
PROGRAM CHANGE data is PROGRAM CHANGE data is not |
transmitted/received (default status). transmitted/received.
e You can also transmit data for any |
PROGRAM PROGRAM CHANGE number. |
CHANGE (Refer to page 22.) |
e Please refer to page 22 for information
about the program change number of |
each sound button.
Pedal operation data is transmitted/ | Pedal operation data is not transmitted/ |"
PEDAL à
received (default status). received.
EFFECT The DIGITAL EFFECT on/off status is | The DIGITAL EFFECT on/off status is
transmitted/received (default status). not transmitted/received.
| When this instruments TRANSPOSE | When this instruments TRANSPOSE
function is active, note numbers of the | function is active, note numbers of the
TRANSPOSE transposed notes are transmitted. played keys (non-transposed notes) are
transmitted (default status).
The performance from this instrument | The performance from this instrument
| also sounds from this instrument (default | does not sound from this instrument. Set
LOCAL ae |
CONTROL status). to off when this instrument is to be used
eWhen the POWER is turned on, the | only to transmit data to connected
LOCAL CONTROL is set to on. equipment.
e MULTI TIMBRE and OMNI ON cannot both be turned on at the same time.
20