Technics SX-PX552 - Sound Adjustments and Features; Brilliance Control; Touch Sensitivity Options; Display and Sequencer Basics

BRILLIANCE
The BRILLIANCE allows you to select the
brightness of the sound from 5 settings.
If either of the buttons is pressed once, the
current setting value will appear on the TOUCH SENSITIVITY
display, and it can then be changed. Th
; dgio e keyboard touch (Touch Response) can be
Pressing the BRIGHT button increases the changed to match your type of playing.
brightness; when the MELLOW button is e Choose from LIGHT, NORMAL and HEAVY.
pressed, the sound becomes mellower. During
setting the brightness is shown on the display
(-2 to 2).
e Press both buttons at the same time to
return the brightness to O.
e A short time after the setting is completed,
the display will return to the turned-off
condition.
e If the BRILLIANCE has been set to a
number other than 0, one of the indicators
remains lit.
TEMPO METRONOME SEQUENCER TRANSPOSE TOUCH SENSITIVITY
| jap бо= [0000] боја
(PX554)
Display
The display shows a variety of SEQUENCER
different setting values, and also
the SEQUENCER and
METRONOME tempos.
e During normal playing, it is
turned off.
Record your performance and have it
automatically played back. (Refer to page 15.)
Sustain pedal
^A The right pedal allows you to use sustain.
When a key is released while this pedal is
depressed, the sound is sustained so that it
lingers and slowly fades out.
* String resonance is added to some Setting the effects for each sound
sounds.
(Refer
to
page
13.)
The
DIGITAL
EFFECT,
BRILLIANCE
and
DIGITAL REVERB are stored independently
for each sound. When a SOUND button is
pressed, the effect settings for the selected
sound are recalled.