Techniglass Grinder - Page 3

•
Always use eye protection while
operating this glass grinder
•
Use only a properly grounded,
three-prong outlet
•
Water from reservoir must not reach
electrical outlet
•
Power off THE GRINDER
®
and
THE GRINDER
2
®
when not in use
•
Before grinding, ensure the water
reservoir is adequately lled
•
Do not overll the water reservoir
•
Always install the orange shaft water
seal on shaft when using upper platform
•
When removing THE LUMISHIELD
®
Arm, always cover slot with THE
LUMISHIELD Mount Cap
•
Minimal noise
•
Does not over heat
•
Uses 24X less electricity
SAFETY PRECAUTIONS
NO FOOT
PEDAL NEEDED
Page 2.