10
Use and Care
HOBS WITH TOUCH CONTROLS
When first connected to power or when power is restored after a
power outage, an operating check will be carried out automatically
and all the indicator lights will illuminate for a few seconds.
Description of symbols
Switching the hob on/off
Hold down switch icon for 2 seconds to switch the appliance on.
Displays will illuminate to confirm that the hob is switched on. If no
functions are used within 10 seconds of switching the appliance on,
it will automatically switch off.
When not in use, the hob should be switched off by pressing the
switch icon.
Single cooking zones
To operate the touch controls, lightly press the icon printed on the
ceramic glass surface, which corresponds to the cooking zone you
want to switch on. Pressing an icon is confirmed by a beep.
The display will indicate ‘0’). Press the or icons to activate
the cooking zone and adjust the power at which it should operate.
The power settings range from a minimum of 1 to a maximum of 9.
You must adjust the power within 10 seconds from when the icon is
pressed, otherwise it will automatically switch off.
On/Off
Lock
Increase
Setting
Decrease
Setting
Timer
Dual
Zone
Rear
Right
Front
Right
Rear
Left
Front
Left
Rear
Centre
Front
Centre
To Next Page
Loading...
