Technika BRSS10 - Viewing JPEG Digital Photos

17
VIEWING JPEG PHOTO FILES
Playing photos from a CD-ROM or DVD-ROM:
Load the disc.•
Playing photos from a USB Flash drive:
Dock the USB drive into the USB port located under •
the protective cover on the front panel.
You will now see the Main Menu selection options. The
options available will depend on the content of your disc/
drive. In the example below, the drive contains music, photos
and videos.
From the thumbnail view -
To display a single photo:
Use the • O,P,M,N buttons to highlight the thumbnail
you want to display.
Press the • ENTER button to display this photo.
To view other photos:
Press the • } or { button to step through the photos
in the folder.
To return to the thumbnail view:
Press the • . button.
The thumbnail view will be displayed.
Menu
pane
Thumbnail
pane
Press to start
slideshow
Selected
photo
Disc/drive
contents
Press the • M or N button to highlight the Pictures
option.
Press the • ENTER button to select this option.
If your photos are not stored in folders you will now see a
thumbnail view of your photos.
If your photos are stored in folders, the folders will •
be displayed in the thumbnail pane. Use the P, M,
N buttons to navigate to the folder containing your
photos.
The thumbnail view will appear. To run a slideshow of the photos:
From the thumbnail view, press the • O button to
navigate to the left pane.
Press the • M or N button to select the ‘Start Slide
Show’ option from the menu.
The slideshow will start. When all the photos have been
displayed, the slideshow will stop.
To continually play a slideshow:
Press the • REPEAT button to switch slideshow repeat
mode on or o.
To pause a slideshow:
Press the • /, button to pause a slideshow display.
Press the • /, button to re-start the slideshow.
Changing Slideshow Settings:
Press the • POPUP MENU button to open the slideshow
settings yout menu.
The slideshow settings yout will open.
Press the • M or N button to choose the option of Slide
Show Eects or Slide Show Delay.
Press the • P button to change a setting for the option
you selected.
Press the • M or N button to select the setting you
want.
Press the • ENTER button to conrm the setting.
The setting will change and the yout will close after a short
delay.