Installation
Anti-tilting chain/hose restraining chain
WARNING: Ensure the chains are correctly anchored to
prevent the appliance from tilting forward and to prevent
strain on the hose when the cooker is pulled forward.
The cooker is supplied with two chains which are connected to the
rear left and right of the appliance. The chains should be
connected to the wall directly behind the chains as low as possible
to prevent the appliance from tilting forward. The chains also
prevent strain on the hose when the cooker is pulled forward.
Ensure the chain connections are strong enough to support the
weight of the appliance.
Once the chains are installed, check that they prevent the
appliance from tilting forward and that there is no strain on the
hose when the cooker is pulled as far forward as the chains allow.
34
To Next Page
Loading...
