Although the unit is fully compatibly with USB 1.1 &
2.0 standards, a small percentage of USB flash drives
might not be readable. Some MP3 players may play
into this input but most won’t. If you have a section on
your MP3 player formatted for memory storage you
can drag MP3 files to that partition and use it.
Repeatedly press the FUNCTION key to select the
USB input. Now plug a USB flash disk into the USB
port at the front of the unit. It is essential that the
input be selected before the drive is connected.
The unit will now read the contents of the drive:
To play the complete disc - Press
This display tells you that the first track of the first folder
is playing.
To change tracks: Press repeatedly
The disc will go forward/back one track at a time
To repeat a track: Press once.
The disc will replay the track from the beginning
To search at speed back or forward:
Press and hold .The disc will search at speed and
the sound will mute. Release the button to revert to
normal play.
To pause: Press .
When all the tracks in the first folder have played the
next folder will play until the entire drive has played.
All the other search functions and play modes
operate as for MP3 disc replay except that there is
no Alphabetical Search.
Card-usb
PLAYING USB FLASH DRIVES SLEEP AND ALARM MODE
14
VOLUME
024 stop
04
ESP
VOLUME
VOLUME
001 00:01
01
ESP
Sleep mode sets the system to Standby when the
preset sleep time is reached.
To set SLEEP mode:
Press the SLEEP key repeatedly to cycle the sleep time in
minutes. OFF bypasses the function
90 80 70 60 50 40 30 20 10 OFF
When you have set the time the display reverts to
program mode with the addition of the SLEEP icon.
To check the remaining time: Press SLEEP
When the clock has reached ‘00’:
ALARM MODE
You can operate the unit as an alarm clock:
To set the timer it is essential that you have set up
the clock. See P. 8 for details.
Press TIMER. The Alarm ON display appears
Set the alarm ON time: This is the time at which the
unit will switch on.
Press repeatedly to set the hours
Press TIMER
Press repeatedly to set the minutes
Press TIMER. The Alarm OFF display appears
Set the alarm OFF time: This is the time at which the
unit will switch off.
Press repeatedly to set the hours
Press TIMER
Press repeatedly to set the minutes
Press TIMER
The normal display will re-appear with the clock icon
Sleep
SLEEP
90
VOLUME
001 00:01
01
ESP
Sleep
56
SLEEP
VOLUME
00:00
On
VOLUME
07:00
On
VOLUME
07:15
On
VOLUME
00:00
Off
VOLUME
08:00
Off
VOLUME
08:30
Off
VOLUME
08:30
Off
To Next Page
Loading...