Capturing Images
Your
camera
is equipped with a 2.36" full color LTPS-TFT LCD monitor to help you
compose images, playback recorded images/video clips or adjust menu settings.
1. Press the Power button to turn the power on.
The status LED lights green and the
camera
is initiated.
2. Set the
camera
mode to [ ].
3. Compose your image in the LCD monitor.
Pressing the button zooms in on the subject, and enlarges the subject on the
LCD monitor.
Pressing the button provides a wider angle image.
4. Press the shutter button.
Pressing the shutter button down halfway
automatically focuses and adjusts the
exposure, and pressing the shutter button
down fully captures the images.
The focus area frame turns blue when the
camera
is in focus and the exposure is
calculated.
When the focus or exposure is not
suitable, the frame of the focus area turns
yellow.
1
2
EN-5
To Next Page
Loading...
Need help?
General
