Ignition plug
Automatic burner ignition is provided by a ceramic 'plug' and a
metal electrode (Ignition Candle - E on page 7). Periodically clean
these parts of the hob thoroughly. In addition, to avoid ignition
difficulties, check that the cavities in the burner are not obstructed.
To remove deposits from the burner cavities, remove the burner
caps. After cleaning, put the burner heads and caps back together
and return them correctly to their position. After washing, replace
the pan supports, checking that they are correctly positioned.
13
Use and Care
To Next Page
Loading...
Need help?
General
