Basket height adjustment mechanism on the upper basket
of your machine is designed to let you adjust the height of
your upper basket upwards or downwards,without removing it
from your machine when it is full,and create large spaces at
Upper Basket Height Adjustment
In loaded basket adjustment mechanism, make sure that both sides are in the same position
(up or down).
1
2
Upper position Lower position
the top or bottom area of your machine as needed.Basket of your machine is set to lower
position in factory settings.In order to raise your basket,hold it from both sides and pull it
upwards.In order to lower it,hold it from both sides again,and leave it.
Upper/Lower basket Folding racks
Folding racks consisting of three/two parts in the upper/lower basket of your machine are designed in
order to let you place big items easier as pots, pans, etc. If requested, each part can be folded
separately, or all of them can be folded and larger can be obtained. You can use folding racks by
rasing then upwards, or by folding.
2
1
2
1
Upper Basket
Lower Basket