Page 7
INSTALLING A USB DEVICE OR MEMORY CARD
To insert a memory card. Position the card with the cropped corner
facing down and press gently in.
To release a memory card. Grip both sides of the card and gently pull
out.
When fi rst switched on the pictures will display as a Slide Show.
Thereafter the display will depend on the setup you have customised.
NOTES: You should only insert one media source at any time.
• If you switch on the DPF with a USB drive and a memory card
inserted in the frame, the memory card photos will be displayed.
• If you have a USB drive inserted then insert a media card the DPF
will play the media card and vice versa.
To Next Page
Loading...