TechniSat BLUSPEAKER TWS

DE
EN
56 57
The blue power LED now lights up
constantly and a confirmation tone
is heard.
A connection has been successfully
established.
> If you want to use another
device with the BLUSPEAKER
TWS, switch o the Bluetooth
function on the device you no
longer want, or press and hold
the Bluetooth buon (1) until
you hear a confirmation tone
and the LED flashes blue.
> Then carry out the steps
described above with the
new device.
If the pairing process is
not successful, switch the
BLUSPEAKER TWS o briefly and
then on again.