TechniSat DIGIT S3 DVR User Manual

96
Regional channels
Some broadcasters transmit channels with varying regional content. On this page
you can define your preferences for these regional channels. The selected regional
channel is automatically set by switching to the relevant channel provider.
> Use the arrow keys to highlight the channel provider you would like to
specify for your preferred regional channel.
> Press the OK key to open a window with the regional channels available for
this broadcaster.
> Use the up/down arrow keys to select your preferred regional channel.
> Press the OK key to close the window again.
> To accept the selected regional channels, use the arrow keys to highlight the
Accept field.
> Press the OK buon to move on to the next step of the installation.
If you subsequently select a dierent regional channel as a programme
provider, this will be saved for this programme provider.
Digit S3 DVR_V2.indd 96Digit S3 DVR_V2.indd 96 23/02/2022 08:5323/02/2022 08:53

TechniSat DIGIT S3 DVR Specifications

General

Tuner type	Digital
Demodulation	QPSK
Product color	Black
Number of tuners	1 tuner(s)
Audio output channels	- channels
On Screen Display (OSD)	Yes
Electronic Program Guide (EPG)	-
Digital Satellite Equipment Control (DiSEqC)	1.0, 1.2
Package weight	994 g
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	10 - 75 %
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (typical)	6.2 W
Video codecs	H.264
Cables included	HDMI
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Wi-Fi	No
Networking standards	IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Signal source	Cable, Ethernet (RJ-45), Satellite
Digital signal format system	DVB-S, DVB-S2

Weight and Dimensions

Depth	130 mm
Width	180 mm
Height	44 mm
Weight	380 g