EasyManuals Logo

TechniSat DIGIT S3 DVR User Manual

TechniSat DIGIT S3 DVR
Go to English
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #97 background imageLoading...
Page #97 background image
97
DE
EN
Loading SFI (EPG) data
Your digital receiver features an electronic programme guide (EPG) called SFI
(SiehFern Info). You must first get the receiver to download the EPG (SFI) data
from the broadcasters to enable electronic program guide data to be displayed.
For this reason, the receiver will automatically start downloading the EPG data
aer the channel list update or aer the channel scan is completed. This process
can take up to 30 minutes.
> If you do not want to wait for the EPG data to be downloaded, you can skip
this process by pressing the INFO key.
> The EPG data will then be automatically updated during the following night,
or you can update it manually at any time.
If the EPG update has been skipped, your device will automatically load the
EPG data at the time set according to Section 15.2 in the the instruction
manual, as long as the automatic EPG update (Section 15.1 of the instruction
manual) remains enabled and the device is also in Standby mode at this
time. You can also start the update manually at any time (Section 15.7 in the
instruction manual).
Digit S3 DVR_V2.indd 97Digit S3 DVR_V2.indd 97 23/02/2022 08:5323/02/2022 08:53

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TechniSat DIGIT S3 DVR and is the answer not in the manual?

TechniSat DIGIT S3 DVR Specifications

General IconGeneral
Tuner typeDigital
DemodulationQPSK
Product colorBlack
Number of tuners1 tuner(s)
Audio output channels- channels
On Screen Display (OSD)Yes
Electronic Program Guide (EPG)-
Digital Satellite Equipment Control (DiSEqC)1.0, 1.2
Package weight994 g
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)10 - 75 %
AC input voltage230 V
AC input frequency50 Hz
Power consumption (typical)6.2 W
Video codecsH.264
Cables includedHDMI
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Wi-FiNo
Networking standardsIEEE 802.3, IEEE 802.3u
Ethernet LAN data rates10, 100 Mbit/s
Signal sourceCable, Ethernet (RJ-45), Satellite
Digital signal format systemDVB-S, DVB-S2
Weight and Dimensions IconWeight and Dimensions
Depth130 mm
Width180 mm
Height44 mm
Weight380 g