6.3 Audio/Video settings
In order to optimize the performance of your digital receiver
in conjunction with your television set, you may wish to make
further settings in the menu Audio /Video Settings.
> Press the Menu key to call up the Main Menu.
> Use the arrow keys up/down to select the line
Settings.
> Confirm by pressing OK. The sub-menu Settings
will be displayed. (Fig. 6-4)
> Now use the arrow keys up/down to select the
line Audio/Video Settings.
> Confirm by pressing OK. The menu Audio/Video
Settings will be displayed. (Fig. 6-5)
>You can use the arrow keys up/down to move the
marker around within the menu, and change the indi-
vidual settings as indicated. When selecting a menu
item please also note any messages displayed on
screen.
The following settings can be adjusted:
6.3.1 Picture format TV set
Use the arrow keys left/right to select the appropriate
picture format for your TV set, 4:3 or 16:9. This function
provides for automatic adjustment of the picture format bro-
adcast to your television set.
6.3.2 Language (Audio signal)
Use the arrow keys right/left to select your preferred
language. If the language is available from the provider, this
language will be automatically selected.
6.3.3 Language (Sub-titles)
Sub-titles can be displayed on your screen using this DVB
receiver. If the function Sub-titles is switched on, and the
language selected is being broadcast, these will be automati-
cally displayed.
If the function is not switched on, sub-titles can also be
displayed manually. Sub-titles are indicated by the osd inser-
tion Sub-title choosing shown in the information box.
Please also note Point 7.13 of this operating manual.
6.3.4 TV SCART mode*
Use the arrow keys right/left to select the appropriate
setting for your TV set,FBAS, S-Video or RGB. The stan-
dard setting is FBAS.
6.3.5 VCR SCART mode
Use the arrow keys left/right to select the appropriate
setting for your video recorder, either FBAS or S-Video.
17
(Fig. 6-4)
(Fig. 6-5)
*valid only for DigiPal 2
To Next Page
Loading...