TechniSat DIGITRADIO 231 OD - Page 119

119
DE
EN
FR
NL
PL
IT
> Press the INFO/MENU buon repeatedly to exit the manual scan.
8.9 Volume adjustment (DRC)
The DRC option is used to set the compression rate, which compensates for dynamic
fluctuations and the associated volume variations.
> Open the main menu by pressing and holding the INFO/MENU buon.
> Use the TUNING/SKIP buons to select the menu item [Audio seings] and
press the SELECT buon.
> Then use the TUNING/SKIP buons to select the [DRC] menu item and press the
SELECT buon.
> Select the compression rate using TUNING/SKIP:
DRC high - high compression
DRC low - low compression
DRC o - compression switched o.
> Confirm by pressing the SELECT buon.
> Press the INFO/MENU buon repeatedly to exit the seing.