92
Repeat alarm
> Here you can choose between [Daily] (every day of the week), [Once], [Weekdays]
(Mon. - Fri.) and [Weekends] (Sat. and Sun.) by turning Tune/Select (4). Press Tune/
Select (4) to apply the seing.
If you have selected [Once] under Repeat , you will now be asked to enter the date.
This is also done as usual by turning and pressing Tune/Select (4).
Volume
> Now you can adjust the alarm volume by turning Tune/Select (4).
Saving
> By pressing Tune/Select (4) to accept the volume seing, the alarm seings made
are also saved.
The time must be imported for the alarm to function properly. For more details, see
Section 10.3.2.
When an alarm is active, an alarm symbol appears on the display.
To Next Page
Loading...