TechniSat DIGITRADIO 52 CD User Manual

102
Aer switching on the device for the first time, you must first set the Language.
Using the < or > buons, select one of the available languages and confirm the
selection by pressing the SELECT/ MENU buon. The device then automatically
performs a complete scan in DAB mode. While scanning, the display information
shows the progress of the digital radio stations detected. Aer completing the
station scan the first DAB+ channel is played.
5.4.2 Switching o the device
> By briefly pressing the On/Standby buon you can switch the device to standby
mode. [Standby] appears briefly on the display. The time is shown on the
display. The display brightness in standby mode can be adjusted by following the
instructions in Section 13.2.
5.4.3 Adjusting the Volume
> Adjust the volume with the Volume up/down buons. The set volume is shown
on the display.

TechniSat DIGITRADIO 52 CD Specifications

General

Brand	TechniSat
Model	DIGITRADIO 52 CD
Category	Clock Radio
Language	English